Items where Author is "Ismail, S. O."
Number of items: 62.
Article
Isolation of microcrystalline cellulose from wood and fabrication of polylacticacid (PLA) based green biocomposites. (2024)
S. M. Sekar,
R. Nagarajan,
P. Selvakumar,
S. O. Ismail,
K. Krishnan,
F. Mohammad,
M. R. Shaik
and
N. Ayrilmis
![]()
Effects of ZnO addition on the microstructure/corrosion, wear and mechanical properties of sintered Mg-Al matrix composites. (2023)
S. Jayasathyakawin,
M. Ravichandran,
S. O. Ismail
and
G. G. Veerappan
![]()
Piezoelectric effects on bone modeling for enhanced sustainability. (2023)
B. I. Oladapo,
S. O. Ismail,
J. F. Kayode
and
Omolayo M. Ikumapayi
![]()
Corrosion behaviours of additively manufactured nitrided 17-4 PH steels in different environments. (2023)
J. R. J. Michla,
R. Nagarajan,
S. O. Ismail,
T. Ramprabhu,
S. Siengchin,
M. P. I. Devi
and
F. Mohammad
![]()
Effect of chemical treatment on physico-chemical properties of a novel extracted cellulosic Cryptostegia grandiflora fiber. (2023)
A. Udhayakumar,
K. Mayandi,
N. Rajini,
R. K. Devi,
M. Muthukannan,
M. Murali,
S. O. Ismail,
F. Mohammad
and
H. A. Al-Lohedan
![]()
Effects of hydroxyapatite addition on the microstructure and mechanical properties of sintered magnesium matrix composites. (2023)
S. Jayasathyakawin,
M. Ravichandran,
S. O. Ismail
and
D. Srinivasan
![]()
Effect of Magnetic Field on Vibration of Electrorheological Fluid Nanoplates with FG‑CNTRC Layers. (2023)
P. R. Safari,
S. O. Ismail,
C. Thongchom,
S. Sirimontree
and
T. Jearsiripongkul
![]()
Investigation of wear behavior in self-lubricating ABS polymer composites reinforced with glass fiber/ABS and glass fiber/carbon fiber/ABS hybrid. (2023)
A. Dhandapani,
S. Krishnasamy,
R. Nagarajan,
A. D. A. Selvaraj,
S. M. K. Thiagamani,
C. Muthukumar,
F. Mohammad,
H. A. Al-Lohedan
and
S. O. Ismail
![]()
An automated software development for analysis of the morphological-tensile property relationship in egg shell bio-based particulate composites using machine learning algorithms. (2023)
G. E. Rani,
R. Murugeswari,
S. Vairamuthu,
N. Rajini,
F. Mohammad,
S. Siengchin,
S. O. Ismail
and
K. Senthilkumar
![]()
Impact of rGO-coated PEEK and lattice on bone implant. (2022)
I. O. Bankole,
S. O. Ismail,
O. M. Ikumapayi
and
P. G. Karagiannidis
![]()
Extraction and characterization of natural cellulosic Erythrina variegata fiber for biocomposites. (2022)
T. P. Balaji,
A. Senthilkumar,
A. Saravanakumaar,
B. M. C. Rajan,
R. Nagarajan,
S. O. Ismail,
F. Mohammad,
S. Vairamuthu
and
M. P. I. Devi
![]()
Effects of Moisture Absorption and Thickness Swelling Behaviors on Mechanical Performances of Carica Papaya Fiber Reinforced Polymeric Composites. (2022)
A. Saravanakumaar,
A. Senthilkumar,
B. M. Rajan,
N. Rajini,
S. O. Ismail,
F. Mohammad
and
H. A. Al-Lohedan
![]()
Nanocomposite cotton gauze cloth with in situ generated silver, copper and their binary metal nanoparticles by bioreduction method. (2022)
B. Ashok,
M. P. Indira Devi,
P. Sivaranjana,
A. V. Rajulu,
S. O. Ismail,
F. Mohammad,
H. A. Al-Lohedan
and
R. Nagarajan
![]()
Applicability of angular orientations of gating designs to quality of sand casting components using two-cavity mould set-up. (2021)
I. Rajkumar,
N. Rajini,
T. R. Prabhu,
S. O. Ismail,
S. Siengchin,
F. Mohammad
and
H. A. Al-Lohedan
![]()
Characterization and optimization of influence of MoS2 hybridization on tribological behaviours of Mg–B4C composites. (2021)
C. Kailasanathan,
P. R. Rajkumar,
N. Rajini,
G. D. Sivakumar,
T. Ramesh,
S. O. Ismail,
Faruq Mohammad
and
Hamad A Al-Lohedan
Mechanical performances of hip implant design and fabrication with PEEK composite. (2021)
B. I. Oladapo,
S. A. Zahedi
and
S. O. Ismail
![]()
Tribological analysis of engineering plastics/steel friction pairs. (2021)
Robert Keresztes,
Gabor Kalacska,
Rajini Nagarajan,
Karthikeyan Subramanian,
Sukumaran Jacob
and
S. O. Ismail
![]()
Mechanical, interfacial and thermal properties of silica aerogel-infused flax/epoxy composites. (2021)
M. Chandrasekar,
R. M. Shahroze,
K. Senthilkumar,
T. S. M. Kumar,
M. R. Ishak,
N. Rajini,
S. Siengchin
and
S. O. Ismail
![]()
Experimental and simulation analysis on multi-gate variants in sand casting process. (2021)
I. Rajkumar,
N. Rajini,
A. Alavudeen,
T. Ram Prabhu,
S. O. Ismail,
F. Mohammad
and
H. A. Al-Lohedan
![]()
Experimental investigation and statistical analysis of additively manufactured onyx-carbon fiber reinforced composites. (2020)
S. R. Piramanayagam,
M. Kalimuthu,
R. Nagarajan,
A. M. A. K. Sait,
R. K. Krishnamoorthy,
S. O. Ismail,
S. Siengchin,
F. Mohammad
and
H. Al-Lohedan
![]()
Lattice design and 3D-printing of PEEK with Ca10(OH)(PO4)3 and in-vitro bio-composite for bone implant. (2020)
B. I. Oladapo,
S. O. Ismail,
B. Oluwole,
F. T. Omigbodun,
M. A. Olawumi
and
M. A. Muhammad
![]()
Animal fiber characterization and fiber loading effect on mechanical behaviors of sheep wool fiber reinforced polyester composites. (2020)
J. Manivannan,
S. Rajesh,
K. Mayandi,
N. Rajini,
S. O. Ismail,
F. Mohammad,
M. K. Kuzman
and
H. A. Al-Lohedan
![]()
Atomistic simulations of interfacial deformation and bonding mechanism of Pd-Cu composite metal membrane using cold gas dynamic spray process. (2020)
S. T. Oyinbo,
T. C. Jen,
Y. Zhu,
S. J. Ajiboye
and
S. O. Ismail
![]()
Cellulosic fiber based hybrid composites: A comparative investigation into their structurally influencing mechanical properties. (2020)
V. Vignesh,
A. N. Balaji,
B. R. M. Rabi,
N. Rajini,
N. Ayrilmis,
M. K. V. Karthikeyan,
F. Mohammade,
S. O. Ismail
and
H. A. Al-Lohedan
![]()
Evaluation of mechanical, thermal and water absorption behaviors of Polyalthia longifolia seed reinforced vinyl ester composites. (2020)
B. Stalin,
N. Nagaprasad,
V. Vignesh,
M. Ravichandran,
N. Rajini,
S. O. Ismail
and
F. Mohammad
![]()
Applicability of cellulosic-based Polyalthia longigolia seed filler reinforced vinyl ester biocomposites on tribological performance. (2020)
N. Nagaprasad,
B. Stalin,
V. Vignesh,
M. Ravichandran,
N. Rajini
and
S. O. Ismail
![]()
3D printing of PEEK–cHAp scaffold for medical bone implant. (2020)
B. I. Oladapo,
S. A. Zahedi,
S. O. Ismail,
F. T. Omigbodun,
B. Oluwole,
M. A. Olawumi
and
M. A. Muhammad
![]()
3D printing and morphological characterisation of polymeric composite scaffolds. (2020)
B. I. Oladapo,
S. O. Ismail,
M. Zahedi,
A. Khan
and
H. Usman
![]()
Characterization of Nano-Mechanical, Surface and Thermal Properties of Hemp Fiber-Reinforced Polycaprolactone (HF/PCL) Biocomposites. (2020)
H. N. Dhakal,
S. O. Ismail,
J. Beaugrand,
Z. Zhang
and
J. Zekonyte
![]()
Characterization of Novel Lignocellulosic Spinifex littoreus Fibers and Their Composites. (2020)
M. Soosai,
C. Thankian,
W. J. J. Thangiah,
R. Nagarajan,
M. Kalimuthu,
S. O. Ismail
and
F. Mohammad
![]()
An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability. (2019)
M. M. Prabhakar,
N. Rajini,
N. Ayrilmis,
K. Mayandi,
S. Siengchin,
K. Senthilkumar,
S. Karthikeyan
and
S. O. Ismail
![]()
Investigation into mechanical, absorption and swelling behaviour of hemp/sisal fibre reinforced bioepoxy hybrid composites: Effects of stacking sequences. (2019)
S. M. K. Thiagamani,
S. Krishnasamy,
C. Muthukumar,
J. Tengsuthiwat,
R. Nagarajan,
S. Siengchin
and
S. O. Ismail
![]()
Experimental and numerical prediction of extrusion load at different lubricating conditions of aluminium 6063 alloy in backward cup extrusion. (2019)
S. T. Oyinbo,
O. M. Ikumapayi,
T. C. Jen
and
S. O. Ismail
![]()
Effects of stacking sequences on static, dynamic mechanical and thermal properties of completely biodegradable green epoxy hybrid composites. (2019)
K. Senthilkumar,
T. S. M. Kumar,
M. Chandrasekar,
J. Tengsuthiwat,
N. Rajini,
S. Siengchin,
S. O. Ismail
and
N. C. Brintha
![]()
Experimental Characterization of Electrical Discharge Machining of Aluminum 6061 T6 Alloy using Different Dielectrics. (2019)
M. Niamat,
S. Sarfraz,
E. Shehab,
S. O. Ismail
and
Q. S. Khalid
![]()
Recent advances in thermal properties of hybrid cellulosic fiber reinforced polymer composites. (2019)
S. Krishnasamy,
S. M. K. Thiagamani,
C. Muthukumar,
R. Nagarajan,
R. M. Shahrose,
S. Siengchin,
S. O. Ismail
and
M. P. Indira Devi
![]()
Tribological Properties of Cyperus pangorei Fiber-Reinforced Polyester Composites (Friction and Wear Behavior of Cyperus pangorei Fiber/Polyester Composites). (2019)
N. Rajini,
K. Mayandi,
M. M. Prabhakar,
S. Siengchin,
N. Ayrilmis,
C. Bennet
and
S. O. Ismail
![]()
Thermal and structural characterization of acrylonitrile butadiene styrene (ABS) copolymer blended with polytetrafluoroethylene (PTFE) particulate composite. (2019)
R. M. Kumar,
N. Rajini,
T. S. M. Kumar,
K. Mayandi,
S. Siengchin
and
S. O. Ismail
![]()
Multi-objective optimisation for minimum quantity lubrication assisted milling process based on hybrid response surface methodology and multi-objective genetic algorithm. (2019)
J. Mumtaz,
Z. Li,
M. Imran,
L. Yue,
M. Jahanzaib,
S. Sarfraz,
E. Shehab,
S. O. Ismail
and
K. Afzal
![]()
Influence of barely visible impact damage on post-impact residual flexural properties of hybrid Fibri Rock – Aero Eco-composites. (2018)
H. N. Dhakal,
S. O. Ismail,
C. Jiang
and
T. Sweatman
![]()
Other
Design and development of a small-scale cement-based 3D printing robot extrusion nozzle. (2024)
Oluwatimilehin Disu,
S. O. Ismail,
Luke Wood,
Andreas Chrysanthou
and
Antonios Kanellopoulos
![]()
Benefiting from biomimicry through 3D printing to enhance mechanical properties of polymeric structures: Simulation approach. (2023)
K. C. Jadav,
S. O. Ismail
and
B. I. Oladapo
![]()
Free Vibration, Mechanical and Damping Properties of Woven Jute FRP Composites with the Effect of Stacking Arrangements. (2023)
S. Senthilrajan,
N. Venkateshwaran,
R. Nagarajan,
S. O. Ismail,
P. Sivaranjana
and
Suchart Siengchin
![]()
4D Printing of Nanostructure Modified Shape Memory Polymer Composites. (2022)
B. I. Oladapo,
S. O. Ismail,
F. T. Omigbodun,
B. Oluwole,
M. A. Olawumi
and
Y. A. Samad
![]()
Feasibility of elastomeric composites as alternative materials for marine applications: A compendious review on their properties and opportunities. (2022)
D. Aravind,
K. Senthilkumar,
N. Rajini,
T. S. M. Kumar,
M. Chandrasekar,
S. O. Ismail,
R. Yeetsorn,
J. Parameswaranpillai,
S. Siengchin
and
M. P. Indira Devi
![]()
4D printing: Pragmatic progression in biofabrication. (2022)
J. Sonatkar,
B. Kandasubramanian
and
S. O. Ismail
![]()
Epoxy/hollow glass microsphere syntactic foams for structural and functional application - A review. (2022)
S. Anirudh,
C. G. Jayalakshmi,
A. Anand,
B. Kandasubramanian
and
S. O. Ismail
![]()
Composites as candidate materials for photovoltaic cells. (2022)
T. R. Olorunfemi,
N. I. Nwulu
and
S. O. Ismail
![]()
Bio-mediated Synthesis of Nanomaterials for Packaging Applications. (2021)
P. Sivaranjana,
N. Rajini,
V. Arumugaprabu
and
S. O. Ismail
![]()
3D printing of PEEK and its composite to increase biointerfaces as a biomedical material - A review. (2021)
B. I. Oladapo,
S. A. Zahedi,
S. O. Ismail
and
F. T. Omigbodun
![]()
Recycling of composite materials. (2021)
N. A. Shuaib,
A. M. Sultan,
S. O. Ismail,
A. A. Samat,
N. W. Ya Omar,
A. I. Azmi
and
P. T. Mativenga
![]()
Conventional and Additively Manufactured Stainless Steels: A Review. (2021)
J. R. J. Michla,
N. Nagaprasad,
K. Senthilkumar,
S. Siengchin,
S. O. Ismail
and
T. R. Prabhu
![]()
Comprehensive Study on Tool Wear During Machining of Fibre-Reinforced Polymeric Composites. (2021)
S. O. Ismail,
S. Sarfraz,
M. Niamat,
M. Mia,
M. K. Gupta,
D. Y. Pimenov
and
E. Shehab
![]()
Influence of Drill Geometry Design on Drilling-Induced Damage Reduction in Fibre-Reinforced Polymeric Composites. (2021)
S. O. Ismail
![]()
Review on 3D printing: Fight against COVID-19. (2020)
B. I. Oladapo,
S. O. Ismail,
T. D. Afolalu,
D. B. Olawade
and
M. Zahedi
![]()
Machinability of Bio-composites: Challenges and Prospects. (2020)
S. O. Ismail
and
H. N. Dhakal
![]()
3D Printing using Cellulose Nanoparticles. (2020)
H. N. Dhakal,
S. O. Ismail
and
J. J. Andrew
![]()
Influence of Ply Stacking Sequences on the Impact Response of Carbon Fibre Reinforced Polymer Composite Laminates. (2019)
Kristian Gjerrestad Andersen,
Gbanaibolou Jombo,
S. O. Ismail,
Segun Adeyemi,
N. Rajini,
Sufyan Akram
and
M Selwin
![]()
A scale-up of energy-cycle analysis on processing non-woven Flax/PLA tape and triaxial glass fibre fabric for composites. (2019)
Gilles Toffe,
S. O. Ismail,
Diogo Montalvao,
Jason Knight
and
Guogang Ren
![]()
Modelling the Effects of Friction on Tool-Chip Interface Temperature During Orthogonal Cutting of Al6061-T6 Aluminium Alloy. (2019)
S. J. Ojolo,
S. O. Ismail
and
K. Ogbuanu
![]()
Investigation on Induced-Residual Stress During End Milling Operation Using Analytical Modelling. (2018)
S. J. Ojolo,
A. A. Ogundare,
S. O. Ismail
and
O. T. Kofoworola
Machining of frp composite laminates with cd and uad techniques : A comparative and experimental investigation. (2016)
S. O. Ismail,
H. N. Dhakal,
A. Roy,
D. Wang
and
I. Popov
![]()