Date Item Type No Grouping

A review on prognostics and health monitoring of proton exchange membrane fuel cell. (2017) Thamo Sutharssan, Diogo Montalvao, Yong Chen, Wen Chung Wang, Claudia Pisac and Hakim Elemara

Opto-mechanical design for sight windows under high loads. (2017) Balazs Ihracska, Roy James Crookes, Diogo Montalvão, Mohammad Reza Herfatmanesh, Jun Peng, Shahid Imran and Theodosios Korakianitis

A Generalised Multiple-Mass Based Method for the Determination of the Live Mass of a Force Transducer. (2017) Diogo Montalvao, Thomas Baker, Balazs Ihracska and Muhammad Aulaqi

A Review of Computational Fluid Dynamics Simulations on PEFC Performance. (2016) Yong Chen, Louise Enearu, Diogo Montalvao and Thamo Sutharssan

Economic Analysis of Domestic Combined Heat and Power System in the UK. (2016) Thamo Sutharssan, Diogo Montalvao, Yong Chen, Wen-Chung Wang and Claudia Pisac

Chapter 5 - Introduction to Sensors and Signal Processing. (2015) Diogo Montalvao

Rotary Fatigue Testing Machine to Determine the Fatigue Life of NiTi alloy Wires and Endondontic Files. (2015) André Carvalho, Manuel Freitas, Luís Reis, Diogo Montalvao and Manuel Fonte

An experimental study on the evolution of modal damping with damage in carbon fiber laminates. (2015) Diogo Montalvão, Dimitris Karanatsis, A. M. R. Ribeiro, Joana Arina and Richard Baxter

Correlating peer and tutor assessment on a low-stakes engineering assignment. (2015) Diogo Montalvão and Thomas Baker

Rotary Fatigue Testing Machine to Determine the Fatigue Life of NiTi. (2015) André Carvalho, Manuel Freitas, Luís Reis, Diogo Montalvão and Manuel Fonte

An Alternative Method to the Identification of the Modal Damping Factor based on the Dissipated Energy. (2015) Diogo Montalvão and J. M. M. Silva

A study on the influence of Ni-Ti M-Wire in the flexural fatigue life of endodontic rotary files by using Finite Element Analysis. (2014) Diogo Montalvão, Qiu Shengwen and Manuel Freitas

A Contribution to the Modal Identification of the Damping Factor based on the Dissipated Energy. (2014) Diogo Montalvão and J. M. M. Silva

Computational analysis of a car chassis frame under a frontal collision. (2014) Diogo Montalvão and Magnus Moore

Structural characterisation and mechanical FE analysis of conventional and M-Wire Ni-Ti alloys used in endodontic rotary instruments. (2014) Diogo Montalvão, Francisca S. Alcada, Francisco Manuel Bráz Fernandes and Sancho Vilaverde Correia

Aeroelastic vibration control of hybrid airships using Regenerative Actuators. (2013) Vatsalkumar Patel, Farbod Khoshnoud, Georgios Pissanidis, Diogo Montalvão and Yong Chen

Sensors and Signal Processing. (2013) Diogo Montalvão

Automation in Strain and Temperature Control on VHCF with na Ultrasonic Testing Facility. (2013) Manuel deFreitas, Yoann Lage, A. M. R. Ribeiro, Diogo Montalvão and Luís Reis

Industrially based engineering group projects. (2013) Geoffrey Angel, Diogo Montalvão and David Dell

Experimental Measurement of the Complex Young’s Modulus on a CFRP Laminate considering the Constant Hysteretic Damping Model. (2013) Diogo Montalvão, R. A. Claudio, A. M. R. Ribeiro and J. A. B. Duarte-Silva

Instumentation of Ultrasonic High-Frequency Machine to Estimate Applied Stress in Middle Section of Specimen. (2012) Yoann Lage, Manuel Freitas, Luís Reis, A. M. R. Ribeiro and Diogo Montalvao

How honest are the students when assessing each other’s work? (2012) Diogo Montalvão

Comparação de limas ProFile GT Série X com ProFile GT através da caracterização por DRX e de um Estudo por Elementos Finitos Comparison of ProFile GT Series X and ProFile GT files through XRD characterisation and a Finite Element stduy. (2012) Francisca S. Alcada and Diogo Montalvao

Ultrasonic Fatigue Analysis on Steel Specimen with Temperature Control : Evaluation of Variable Temperature Effect. (2012) Yoann Lage, Manuel Freitas, Diogo Montalvao, A. M. R. Ribeiro and Luís Reis

Experimental Assessment of a Modal-Based Multi-Parameter Method for Locating Damage in Composite Laminates. (2011) D. Montalvao, A. M. R. Ribeiro and J. A. B. Duarte-Silva

Numeric Comparison of the Static Mechanical Behavior between ProFile GT and ProFile GT Series X Rotary Nickel-Titanium Files. (2011) Diogo Montalvao and Francisca S. Alcada

Design and instrumentation of an ultrasonic fatigue testing machine. (2011) V. Anes, Diogo Montalvao, A. M. R. Ribeiro, Manuel Freitas and Manuel Fonte

Design and Assembly of an Ultrasonic Fatigue Testing Machine. (2011) Manuel Freitas, V. Anes, Diogo Montalvao, Luís Reis and A. M. R. Ribeiro

Hysteretic Damping as an Energy Parameter in Gigacycle Fatigue. (2011) A. M. R. Ribeiro, Diogo Montalvao, J. Azinheira, Manuel Freitas, Luís Reis and M. Fontul

A Numerical-Experimental Method for the Damage Location in Composite Plates. (2010) Diogo Montalvao, A. M. R. Ribeiro and J. A. B. Duarte-Silva

On the use of vibration parameters for the estimation of damage in laminated composite plates. (2010) Diogo Montalvao, A. M. R. Ribeiro and J. A. B. Duarte-Silva

On the use of vibration parameters for the estimation of damage in laminated composite plates. (2010) Diogo Montalvao, J. A. B. Duarte-Silva and A. M. R. Ribeiro

A method for the localization of damage in a CFRP plate using damping. (2009) D. Montalvao, A. M. R. Ribeiro and J. Duarte-Silva

Using the Detection and Relative Damage Quantification Indicator (DRQ) with transmissibility. (2007) N. M. M. Maia, A. M. R. Ribeiro, M. Fontul, Diogo Montalvao and R. P. C. Sampaio

A review of vibration-based structural health monitoring with special emphasis on composite materials. (2006) Diogo Montalvao, N. M. M. Maia and A. M. R. Ribeiro

Harmonica: Stepped-Sine Spectrum Analyser for Transfer Function Measurement and Non-Linear Experimental Assessment. (2006) Diogo Montalvao and M. Fontul

Damping measurements on a carbon fibre reinforced laminate. (2006) D. Montalvao, A. M. R. Ribeiro, N. M. M. Maia, J. Duarte Silva and R. A. Claudio

On the estimation of rotational frequency response functions. (2005) D. Montalvao, A. M. R. Ribeiro, N. M. M. Maia and J. M. M. Silva

Estimation of the rotational terms of the dynamic response matrix. (2004) D Montalvao, A. M. R. Ribeiro, N. M. M. Maia and J. M. M. Silva