Author

Number of items: 66.
2018
  • A review of acid recovery from acidic mining waste solutions using solvent extraction. (2018) Uchenna Kesieme, Andreas Chrysanthou, Maurizio Catulli and Chu Yong Cheng
  • A two-stage approach of manufacturing FeAl40 iron aluminides by self-propagating synthesis and pressureless sintering. (2018) Zhenxue Zhang and Andreas Chrysanthou
  • The optimal use of tris-2-ethylhexylamine to recover hydrochloric acid and metals from leach solutions and comparison with other extractants. (2018) Uchenna Kesieme, Andreas Chrysanthou, Maurizio Catulli and Chu Yong Cheng
  • Interface stability between bare, Mn-Co spinel coated AISI 441 stainless steel and a diopside-based glass-ceramic sealant. (2018) Antonio G. Sabato, Andreas Chrysanthou, Milena Salvo, G. Cempura and Federico Smeacetto
  • 2017
  • Self-piercing riveting-a review. (2017) Dezhi Li, Andreas Chrysanthou, Imran Patel and Geraint Williams
  • Effect of pulsed magnetic treatment on the corrosion of titanium. (2017) Anatolii Babutskyi, Andreas Chrysanthou, Marija Smelina, Gennadii Stepanov and Maciej Ziętara
  • 2016
  • Glass-ceramic sealant for solid oxide fuel cells application: Characterization and performance in dual atmosphere. (2016) A. G. Sabato, G. Cempura, D. Montinaro, A. Chrysanthou, M. Salvo, E. Bernardo, M. Secco and F. Smeacetto
  • Effect of Plastic Deformation on Compliance Curve Based Crack Closure Measurement. (2016) Andrew Lewis, Muhodin Mohin, Andreas Chrysanthou and Yigeng Xu
  • 2015
  • A review of the catalytic oxidation of carbon-carbon composite aircraft brakes. (2015) Mose Bevilacqua, Anatolii Babutskyi and Andreas Chrysanthou
  • Chord line force versus displacement for thin shallow arc pre-curved bimetallic strip. (2015) G. D. Angel, G. Haritos, A. Chrysanthou and V. Voloshin
  • Correlation of dent depth to maximum contact force and damage of composite laminates. (2015) Zeng Shen, Yigeng Xu and A. Chrysanthou
  • 2014
  • Novel glass-ceramic composition as sealant for SOFCs. (2014) Federico Smeacetto, Auristela De Miranda, A. Chrysanthou, Enrico Bernardo, Michele Secco, Massimiliano Bindi, Milena Salvo, Antonio G. Sabato and Monica Ferraris
  • The effect of setting velocity on the static and fatigue strengths of self-piercing riveted joints for automotive applications. (2014) Dezhi Li, Li Han, Mike Shergold, Geraint Williams and A. Chrysanthou
  • Contact behaviour of composite laminate under quasi-static indentation load. (2014) Zeng Shen, Yigeng Xu and A. Chrysanthou
  • 2013
  • Synthesis, luminescence and phase composition of samarium-doped zinc phosphate glass ceramics. (2013) Z. Stoeva, G. Patronov, A. Chrysanthou, D. Tonchev and S. Kasap
  • Thermal cycling of Crofer22APU-sealant-anode supported electrolyte joined structures for planar SOFCs up to 3000 h. (2013) F. Smeacetto, M. Salvo, A. Chrysanthou and T. Moskalewicz
  • 2012
  • Martensitic-Austenitic phase transformation of Ni-Ti SMAs : Thermal properties. (2012) C. Zanotti, P. Giuliani and A. Chrysanthou
  • Effect of pulsed electric current treatment on the corrosion and strength of reinforcing steel. (2012) L. Kruszka, Anatolii Babutskyi, A. Chrysanthou and Chu En Tan
  • Strategic Research Agenda. (2012) A. Chrysanthou
  • 2011
  • Thermal cycling and ageing of a glass-ceramic sealant for planar SOFCs. (2011) F. Smeacetto, A. Chrysanthou, M. Salvo, T. Moskalewicz, F. D'Herin Bytner, L. C. Ajitdoss and M. Ferraris
  • 2010
  • Comparison between the thermal properties of fully dense and porous NiTi SMAs. (2010) C. Zanotti, P. Giuliani, P. Bassani, Z. Zhang and A. Chrysanthou
  • Correlation between the corrosion resistance and the hardness scattering of structural metals treated with a pulsed electric current. (2010) Anatolii Babutskyi, A. Chrysanthou, John Ioannou and I. Mamuzic
  • Corrosion of structural metals treated by pulse electric current. (2010) Anatolii Babutskyi, A. Chrysanthou and John Ioannou
  • Process feasibility analysis of self-pierce riveting high strength low alloy steel. (2010) L. Han, M. Thornton, R. Hewitt, A. Chrysanthou and M. Shergold
  • 2009
  • Cast in situ Cu–TiC composites : synthesis by SHS route and characterization. (2009) S. Rathod, O.P. Modi, B.K. Prasad, A. Chrysanthou, D. Vallauri, V.K. Deshmukh and A.K. Shah
  • Effect of pulsed electric current treatment on corrosion of structural metals. (2009) Anatolii Babutskyi, A. Chrysanthou and J. Ioannou
  • Performance and testing of glass-ceramic sealant used to join anode-supported-electrolyte to Crofer22APU in planar solid oxide fuel cells. (2009) F. Smeacetto, A. Chrysanthou, M. Salvo, Z. Zhang and M. Ferraris
  • Thermal diffusivity of Ni–Ti SMAs. (2009) C. Zanotti, P. Giuliani, G. Riva, A. Tuissi and A. Chrysanthou
  • 2008
  • Characterization and performance of glass-ceramic sealant to join metallic interconnects to YSZ and anode-supported-electrolyte in planar SOFCs. (2008) F. Smeacetto, M. Salvo, A. Ferraris, V. Casalegno, P. Asinari and A. Chrysanthou
  • Formation and microstructure of (Ti, V)C-reinforeed iron-matrix composites using self-propagating high-temperature synthesis. (2008) A. Chrysanthou, Om Prakash Modi, Li Han, Narayanrao Ramakrishnan and J.M. O'Sullivan
  • Evaluation of quality and behaviour of self-piercing riveted aluminium to high strength low alloy sheets with different surface coatings. (2008) Li Han and A. Chrysanthou
  • TiC-TiB2 composites : A review of phase relationships, processing and properties. (2008) D. Vallauri, I. C. Atias Adrian and A. Chrysanthou
  • 2007
  • Erosive-corrosive wear behaviour of Fe-TiC and cobalt based layers separately deposited on En31 steel. (2007) O. P. Modi, B. K. Prasad, A. Chrysanthou, V. P. Deshmukh and A. K. Shah
  • High-stress abrasive wear response of 0.2% carbon dual phase steel : Effects of microstructural features and experimental conditions. (2007) O. P. Modi, Pallavi Pandit, D. P. Mondal, B. K. Prasad, A. H. Yegneswaran and A. Chrysanthou
  • Mechanical behaviour of self-piercing riveted multi-layer joints under different specimen configurations. (2007) L. Han, A. Chrysanthou and K. W. Young
  • Nanostructured TiC1-X-TiB2 Composites Obtained by Metastability Processing. (2007) I. C. Atias Adrian, D. Vallauri, Z. Zhang, A. Chrysanthou, B. DeBenedetti and I. Amato
  • 2006
  • Characterization of fretting fatigue in self-piercing riveted aluminium alloy sheets. (2006) L. Han, A. Chrysanthou, K. W. Young and J. M. O'Sullivan
  • Fretting behaviour of self-piercing riveted aluminium alloy joints under different interfacial conditions. (2006) Li Han, A. Chrysanthou and J.M. O'Sullivan
  • The effect of pre-straining on the mechanical behaviour of self-piercing riveted aluminium alloy sheets. (2006) Li Han, K. W. Young, A. Chrysanthou and J.M. O'Sullivan
  • 2005
  • An investigation of the self-propagating high-temperature synthesis of Ti(Si,Al). (2005) A. Chrysanthou, E.K. Opoku and L. Han
  • The effect of pre-straining on the mechanical behaviour of self-piercing riveted aluminium alloy sheets. (2005) L. Han, K.W. Young, R. Hewitt, A. Chrysanthou and J.M. O'Sullivan
  • 2003
  • Combustion synthesis and subsequent sintering of titanium-matrix composites. (2003) A. Chrysanthou, Y.K. Chen, A. Vijayan and J. O'Sullivan
  • Fretting wear in self-piercing riveted aluminium alloy sheet. (2003) Y.K. Chen, L. Han, A. Chrysanthou and J.M. O'Sullivan
  • The effect of different metallic counterface materials and different surface treatments on the wear and friction of polyamide 66 and its composite in rolling-sliding contact. (2003) Y.K. Chen, O.P. Modi, A.S. Mhay, A. Chrysanthou and J.M. O'Sullivan
  • 1998
  • Combustion synthesis in the Mo-Si-Al ternary system. (1998) S.B. Bhaduri, J.G. Huang, S. Bhaduri and A. Chrysanthou
  • 1997
  • Preparation of Fe-TiC composites by the thermal-explosion mode of combustion synthesis. (1997) A. Saidi, J.V. Wood, J.L.F. Kellie and A. Chrysanthou
  • 1996
  • A study of the combustion synthesis of MoSi and MoSi-matrix composites. (1996) A. Chrysanthou, R.C. Jenkins, M.J. Whiting and P. Tsakiropoulos
  • Enhancing the dispersion of TiC in copper. (1996) A. Chrysanthou and G. Erbaccio
  • Reaction synthesis of carbide-reinforced cast iron. (1996) A. Chrysanthou, N.W. Davies, J. Li, P. Tsakiropoulos and O.S. Chinyamakobvu
  • Phase equilibria in the metal-sulfur-oxygen system and selective reduction of metal oxides and sulfides : Part I. The carbothermic reduction and calcination of complex mineral sulfides. (1996) A. Jha, S. Tang and A. Chrysanthou
  • 1995
  • Production of copper-matrix composites by in situ processing. (1995) A. Chrysanthou and G. Erbaccio
  • Observation of intermetallic Ni3Ti whiskers during combustion synthesis reactions in the Ni-Ti-C system. (1995) A. Chrysanthou and K.H. Kassim
  • Behaviour of tantalum in the presence of CO and CO/CO mixtures at elevated temperatures. (1995) A. Chrysanthou and P. Grieveson
  • New technologies for the reactive processing of metal-matrix composites. (1995) A. Chrysanthou
  • 1994
  • Characteristics of the combustion synthesis of TiC and Fe-TiC composites. (1994) A. Saidi, A. Chrysanthou, J.V. Wood and J.L.F. Kellie
  • Kinetic dissociation of nickel titanate and nickel tungstate in oxygen potential gradients. (1994) D.C. Azubike, A. Chrysanthou and B.S. Terry
  • Reduction/carburisation of columbite concentrate. (1994) B.S. Terry, D.C. Azubike and A. Chrysanthou
  • Carbothermic reduction of a columbite concentrate to produce cemented carbides and metal-matrix composites. (1994) A. Chrysanthou, D. Macfarlane and O.S. Chinyamakobvu
  • Preparation of ceramic composite powders from waste colliery minestones. (1994) A. Chrysanthou and T. Sanchuan
  • Preparation and microstructure of AlOTiC composites by self-propagated high temperature synthesis. (1994) A. Chrysanthou, A. Saidi, C.E.W. Aylott and J.V. Wood
  • 1993
  • In situ preparation of copper-matrix composites. (1993) A. Chrysanthou, G. Erbaccio and J.V. Wood
  • Simultaneous carburisation and oxidation of niobium in the presence of carbon monoxide. (1993) A. Chrysanthou and P. Grieveson
  • 1991
  • The observation of metastable molybdenum carbides. (1991) A. Chrysanthou and P. Grieveson
  • Formation of silicon carbide whiskers and their microstructure. (1991) A. Chrysanthou, P. Grieveson and A. Jha
  • Re-evaluation of the thermodynamic stability of calcium oxide. (1991) A. Chrysanthou and P. Grieveson
  • 1989
  • The behaviour of aluminium-chromium ferritic steels in simulated coal gasification atmospheres at 723 K. (1989) K.S. Coley, S.R.J. Saunders and A. Chrysanthou